A high-flow homopolymer polypropylene built for thin-wall injection molding, caps and closures, with fast fill and short cycle times.
Values below are typical and indicative only; final specifications are confirmed per lot and order.
| Melt Flow Rate (230C/2.16kg) | ~ 24 g/10min |
|---|---|
| Density | 0.900 - 0.910 g/cm³ |
| Tensile Yield Stress | 33 - 36 MPa |
| Flexural Modulus | 1300 - 1600 MPa |
| Notched Izod Impact (23C) | 2.0 - 3.0 kJ/m² |
| Vicat Softening Temp | 150 - 156 °C |
| HDT (0.45 MPa) | 90 - 105 °C |
Reference setpoints for thin-wall and closure molding with PPH-Y24.
High flow supports thin walls and long flow paths at lower injection pressure.
Shorter cooling and packing phases reduce total cycle versus low-MFR grades.
Stable mold temperature keeps cap and closure dimensions consistent.
Beverage and cosmetic closures with fast, repeatable molding.
Lightweight containers and single-serve packaging with wall reductions.
Storage and kitchen items needing stiffness and clean surfaces.
Setpoints and gate design for lightweight closures and cups.
Read More →
Request a factory quote for Sinopec PP PPH-Y24 in your required volume and packaging.
