A homopolymer polypropylene tuned for BOPP and cast film with high clarity, narrow MFR spread and stable drawdown on high-speed lines.
Values below are typical and indicative only; final specifications are confirmed per lot and order.
| Melt Flow Rate (230C/2.16kg) | 2.5 - 3.5 g/10min |
|---|---|
| Density | 0.90 - 0.91 g/cm³ |
| Tensile Yield Stress | 30 - 34 MPa |
| Flexural Modulus | ~ 1250 MPa |
| Notched Izod Impact (23C) | ~ 2.5 kJ/m² |
| Vicat Softening Temp | ~ 152 °C |
| Isotactic Index | ≥ 96 % |
Sticky parameter panel with the film conversion sequence for orientation lines.
Even barrel heating and clean melt filtration protect film clarity and reduce gels.
Chill roll temperature and air knife balance control haze and line speed.
Balanced MD/TD draw gives uniform thickness and strong mechanicals.
Packaging film with high clarity for labels, laminates and tape.
General sheet and cast film for thermoforming and conversion.
Laminate and overwrap structures built on oriented PP substrate.
How narrow MFR spread and isotacticity support clean, high-clarity film.
Read More →
Choosing between T03 and other homopolymers for oriented film lines.
Read More →Request a factory quote for Sinopec PP PPH-T03 in your required volume and packaging.
